Sailing Boats Usa

The program can easily be divided into two parts. The Keelboat Sailing Certification Program consists of seven steps in small boats sailing program contains two phases.

Small Boat Sailing Base Standard does not require any previous experience or qualifications. It is the first course of the program of small boat sailing. Students must demonstrate a theoretical knowledge of the names and functions of different parts of a sailboat as well as common terms, sailing and its ancillary components, international rules for preventing collisions at sea and on inland waters and hey must demonstrate a basic knowledge of safety procedures. In practical terms, they must show they can swim for 5 minutes and swim 100 yards, rigging, launch and recover the boat together and trim the sails, sails both upstream and downstream, tactics and jibe, correctly apply the rules of the road to retrieve a man overboard to recover from a capsize, accept and pass a tow rope, tie four knots specified in a given time. In the end, he or she will be able to sail a multihull sailboat drift or light to moderate wind and sea conditions in familiar waters.

The first course in the program Keelboat Sailing Certification is known as Basic Keelboat. No experience or qualifications needed. To complete the course, students must demonstrate that they can put a name and describe how the various parts of a boat whose hull, keel, bow and aft deck. The elements of both running and standing rigging. The different sails, including the names of some of the veil - on foot, fall, luff, head, tack and clew. The various spars, mast and boom. They will be familiar with the terminology used to describe the various sailing maneuvers like the jibe and get to the point. Students will understand the points of sailing either upwind, reaching or running. They will understand the basics of avoiding collisions, including the rules of the road. They demonstrate that they are aware of regulations regarding the registration and identification, proper disposal of waste, to notify in case of accidents and safety equipment is required by law to be transported on a ship and how it is used. They will be able to demonstrate knowledge of participants markup will anchor a boat and describe the choice of anchors and their attributes and defects. In practical terms, they must demonstrate competence in handling sail, they demonstrate their abilities at the helm, including mooring, sailing in both upstream and downstream with a hint of success and jibe. They will complete a successful man overboard recovery. They show they know how to tie different knots and 6 to understand their different uses. At the end of the course students should be able to steer a boat about 20 feet in length in moderate winds in familiar waters.

The second step is called basic coastal cruising and students must possess the Basic Keelboat Sailing Certificate before undertaking this course. The course focuses on safety on board including equipment and procedures. A good understanding of prevention and fight against is necessary. Students will demonstrate knowledge of first aid and treatment of hypothermia. basic meteorology is considered, students must demonstrate an understanding of shipping forecasts. A good understanding of the relationship between the master and crew and the respective duties of each is necessary. Students must be able to undertake basic card usage, including depths, bottom types, dangers, buoys, beacons and lights. The convenience of this course covers boat handling under power and sail, man overboard recovery, different points of sail, reefing and heaving to, mooring and anchoring and interlacing . Once the sailor must be able to cruise safely in regional waters on a sailboat 30 feet in length, in m.